Chromatography Column Tools
Grainger Threading Tool 3/8 Carbide
The Micro 100 Threading Tool is a high speed steel threading tool with a 3/8" shank diameter and 16ER ANSI standard thread. It has a 60 degree included angle and can cut unified screw threads from 4-48 to 1"-8. The overall length is 5" and it weighs 0.19 lbs. This single point threading tool allows quick threading passes on lathes, screw machines, and CNC machines. It features TiN coating for increased tool life. The Micro 100 threading tool is made in the USA.
Uline Safety Steel Strapping Cutter H-5687 | | 1 EA
Signode strapping compatible Lightweight and flexible,Prevents injury by keeping steel strapping from springing back when cut,11 handle,Rubber pads prevent snapback of strapping when cut
Grainger Threading Tool 1/8 Carbide
The Grainger 16T136 is a 16 ton hydraulic bottle jack made by Hein-Werner. It has a minimum height of 10-3/4 inches and a maximum height of 16-1/2 inches. The jack has a welded base for stability with rubber pads to prevent slipping. It has a two piece handle for easy pumping and controlled lowering. The hydraulic system is sealed and protected from dirt and moisture. This high quality hydraulic jack is designed for shop use and lifting equipment, dies, molds and more up to 32,000 pounds.
Waters Corporation Torx Driver Key Set
This product is a Torx Driver Key Set.
- Categorized as a spare parts kit.
Analytical Sales & Services MµLtisleeve 4 Port Temperature Control Unit
*Self-calibrating * Plug & Play smart heater technology * Controls up to 4 column heaters simµLtaneously * 4 independent channels * Used in mµLtiplexing applications * Temperature range from 5C above ambient to 85c * Controller comes with cables, manual, and usb gui software.
Grainger Threading Tool 5/16 Carbide
The Micro 100 Threading Tool is a high-speed steel threading tool with a 5/16" shank diameter and 60 degree included angle. It has a 0.040" minimum minor diameter and can cut up to 8 threads per inch. This single-point threading tool allows both external and internal threading operations. It features TiN coating for increased tool life and lubricity. The overall length is 3-1/2". This threading tool is made in the USA by Micro 100 and can machine a variety of materials including steel, stainless steel, cast iron, aluminum, brass, bronze, plastics and more. It's a versatile threading tool well-suited for lathes, screw machines, and CNC machines.
Microsolv Technology Corporation ValveTool, Wrench with 5/16" Flat and 1/4" Opened Slit End. 1 EA.
The ValveTool™ is very popular because it is designed to reach onto your HPLC instrument's, Rheodyne™ or a Valco™ Injector while tubing is still attached to the Injector or for use on other valves with 1/4" connecting nuts. Easy to tighten or loosen the 1/4" connecting nuts without twisting the tubing during wrenching. The opposite end of the ValveTool™ is a 5/16" flat wrench.
Analytical Sales & Services Nut Extender Tool Micro
This item has a minimum order quantity of 3 per supplier requirements. NUT EXTENDER TOOL MICRO
Waters Corp Waters Flow Splitter, 8.0–30 mL/min, 5000:1, 19 mm Column ID
This flow splitter collects fractions in AutoPurification systems with destructive detectors. It optimizes detector efficiency by diverting eluent to the detector, with the remainder passing through a delay coil to enable peak collection. Suitable for systems with fixed column sizes and flow rates.
- Flow rate range: 8–30 mL/min
- Split ratio: 5000:1
- Nominal flow rate: 20.00 mL/min
- Target column ID: 19 mm
- Split ratio accuracy: ±30% to –20% at nominal rates (with no outlet connections)
- Peak dispersion: Less than 20% on peak area at nominal flow rates
- Minimum delay time: 5 sec. at max flow rates
- Maximum backpressure: 5171 kPa (52 bar, 750 psi) at max flow rates, 25°C
- Maximum downstream pressure (Prep outlet): 1724 kPa (17 bar, 250 psi)
- Operating temperature: 4°C to 40°C
- Operating humidity: 20–80% noncondensing
Sklar Instruments Wire Puller Sklar Microscopy Surgical 1/EA
Wire Puller Sklar Microscopy Surgical 1/EA